Cisco Meraki MR36.
Wi-Fi 6 efficiency for the everyday enterprise.
The MR36 brings Wi-Fi 6 (802.11ax) efficiency to the compact indoor form factor Meraki customers know from
the MR33, roughly doubling effective client capacity through OFDMA while keeping the same easy ceiling/wall
install.
Expert Pre-Sales AdviceCertified reps reply in 1 hour.
Config & Managed ServicesSkip the setup. We'll do it.
POs · Tax-Exempt · Net 30Welcomed for Corp, Edu, & Gov.
Same-Day ShippingOrder by 3pm EST, ships today.
Specifications
MR36 at a Glance
Radios & Antennas
Quad-radio design: 2x2:2 MU-MIMO with OFDMA on 5GHz and 2.4GHz, a dedicated third radio for WIDS/WIPS
and RF optimization, and a fourth integrated radio for BLE scanning and beaconing. Internal
omnidirectional antennas.
Performance & Capacity
1.7 Gbps aggregate throughput (1,201 Mbps @5GHz, 573 Mbps @2.4GHz). OFDMA scheduling roughly doubles
the effective client capacity of the prior-generation MR33 in the same footprint.
Design & Deployment
Compact indoor ceiling/wall mount (9.84" x 4.72" x 1.42", 492g) with a single Gigabit
Ethernet port, powered by 802.3af PoE or 12V DC.
Management & Security
Fully managed from the Meraki cloud dashboard with built-in Air Marshal WIDS/WIPS, RF optimization, and
BLE-based location analytics.
Not sure the MR36 is the right fit?
Compare it against other access points in the Meraki MR series to find the best match for your
environment.
The MR36 supports 802.11ax (Wi-Fi 6), with a 2x2:2 mu-mimo/ofdma + scanning + ble
radios radio configuration delivering up to 1.7 gbps aggregate.
Capacity depends on RF environment and channel width, but the MR36’s radio
design is built to match its target deployment — from light per-room use to high-density venues.
Our engineers can help size your specific site.
The MR36 is designed for indoor ceiling/wall mount, 1x gbe installation. See the
datasheet or installation guide for exact bracket and clearance requirements.
Most MR36 deployments run best on 802.3at (PoE+); some radios or streams may be
reduced on standard 802.3af power. Check the datasheet for the exact power budget.
Like every Meraki access point, the MR36 is provisioned, monitored, and updated
entirely from the cloud-based Meraki dashboard — no on-site controller required.
Ready to deploy the MR36?
Our Meraki-certified engineers can help you size, configure, and deploy your wireless network. Get
pricing and expert advice today.
