Cisco Meraki MR46E.
All the performance of the MR46, engineered for custom antenna coverage.
The MR46E carries the same 4x4:4 Wi-Fi 6 radio chain as the MR46 but swaps internal antennas for six
external connectors, letting you fit directional patch, panel, or omni antennas for warehouses, stadiums,
and other spaces that need custom coverage patterns.
Expert Pre-Sales AdviceCertified reps reply in 1 hour.
Config & Managed ServicesSkip the setup. We'll do it.
POs · Tax-Exempt · Net 30Welcomed for Corp, Edu, & Gov.
Same-Day ShippingOrder by 3pm EST, ships today.
Specifications
MR46E at a Glance
Radios & Antennas
Identical RF chain to the MR46 — 4x4:4 MIMO/OFDMA on both bands plus dedicated scanning and BLE
radios — but with six external antenna connectors (one per radio chain) supporting Meraki's
MA-ANT-3 dipole, patch, panel, and downtilt antenna lineup.
Performance & Capacity
2.98 Gbps aggregate throughput, matching the MR46, with coverage shaped by the external antennas
selected for the deployment.
Design & Deployment
Indoor mount rated for a wider operating temperature range (up to 122°F/50°C) for harsher
indoor environments like warehouses. Includes a 2.5GbE port and requires 802.3at PoE (30W); antennas
sold separately.
Management & Security
Cloud-managed through the Meraki dashboard with built-in Air Marshal WIDS/WIPS and BLE scanning.
Not sure the MR46E is the right fit?
Compare it against other access points in the Meraki MR series to find the best match for your
environment.
The MR46E supports 802.11ax (Wi-Fi 6), with a 4x4:4 mu-mimo, 6 external antenna ports
radio configuration delivering up to 2.98 gbps aggregate.
Capacity depends on RF environment and channel width, but the MR46E’s radio
design is built to match its target deployment — from light per-room use to high-density venues.
Our engineers can help size your specific site.
The MR46E is designed for indoor mount, wide operating temp range installation. See
the datasheet or installation guide for exact bracket and clearance requirements.
Most MR46E deployments run best on 802.3at (PoE+); some radios or streams may be
reduced on standard 802.3af power. Check the datasheet for the exact power budget.
Like every Meraki access point, the MR46E is provisioned, monitored, and updated
entirely from the cloud-based Meraki dashboard — no on-site controller required.
Ready to deploy the MR46E?
Our Meraki-certified engineers can help you size, configure, and deploy your wireless network. Get
pricing and expert advice today.
