Cisco Meraki MR56.
Effortless, self-configuring Wi-Fi 6 for the modern high-density workplace.
The MR56 pairs an 8x8 5GHz radio with a 4x4 2.4GHz radio for balanced, general-purpose high-density
coverage, with a built-in 5 Gbps port that makes it a strong fit for offices, schools, and healthcare
facilities.
Expert Pre-Sales AdviceCertified reps reply in 1 hour.
Config & Managed ServicesSkip the setup. We'll do it.
POs · Tax-Exempt · Net 30Welcomed for Corp, Edu, & Gov.
Same-Day ShippingOrder by 3pm EST, ships today.
Specifications
MR56 at a Glance
Radios & Antennas
5GHz 8x8:8 radio paired with a 2.4GHz 4x4:4 radio (both MU-MIMO/OFDMA), a dedicated real-time WIDS/WIPS
and RF-optimization radio, and a BLE scanning/beaconing radio. Internal omnidirectional antennas.
Performance & Capacity
5.9 Gbps combined aggregate frame rate (4,804 Mbps @5GHz, 1,147 Mbps @2.4GHz), with enhanced tx power
and rx sensitivity to support higher client counts per AP.
Design & Deployment
Indoor ceiling, wall, or desktop mount with a built-in 5 Gbps Ethernet port, powered by 802.3at PoE (up
to 30W, ~22W typical).
Management & Security
Cloud-managed through the Meraki dashboard with built-in Air Marshal WIDS/WIPS and BLE-based location
analytics.
Not sure the MR56 is the right fit?
Compare it against other access points in the Meraki MR series to find the best match for your
environment.
The MR56 supports 802.11ax (Wi-Fi 6), with a 5ghz 8x8:8 + 2.4ghz 4x4:4 radio
configuration delivering up to 5.9 gbps aggregate.
Capacity depends on RF environment and channel width, but the MR56’s radio
design is built to match its target deployment — from light per-room use to high-density venues.
Our engineers can help size your specific site.
The MR56 is designed for indoor mount, built-in 5 gbps port installation. See the
datasheet or installation guide for exact bracket and clearance requirements.
Most MR56 deployments run best on 802.3at (PoE+); some radios or streams may be
reduced on standard 802.3af power. Check the datasheet for the exact power budget.
Like every Meraki access point, the MR56 is provisioned, monitored, and updated
entirely from the cloud-based Meraki dashboard — no on-site controller required.
Ready to deploy the MR56?
Our Meraki-certified engineers can help you size, configure, and deploy your wireless network. Get
pricing and expert advice today.
